C&I Peak Shaving

215 kWh Cabinets for Peak Shaving and Demand Reduction

A 15-minute peak sets your demand charge for the entire month. Shaving it is the fastest-payback storage application in commercial and industrial buildings — and the one with the fewest moving parts.


The Arithmetic

If your facility peaks at 400 kW for fifteen minutes a month and your demand charge is $18/kW, that peak costs you $7,200 a month — whether you used the power for fifteen minutes or fifteen hours.

A 100 kW / 215 kWh cabinet that clips the top 100 kW of that peak saves up to $1,800 a month in demand charges alone, before any energy arbitrage or backup value. Installed cost for a 215 kWh cabinet typically pays back in 3–5 years on demand-charge savings in markets with high demand charges.


The Product

ParameterHJ-ESS-215A
Rated energy215 kWh
Usable energy193.5 kWh (90% DoD)
Rated power100 kW
Cell chemistryLiFePO4, 280 Ah
DC voltage range600–900 V
EnclosureOutdoor cabinet, IP54
Dimensions1,600 × 1,200 × 2,100 mm
Weight≈2,400 kg
CoolingHVAC, thermostat controlled
CertificationCE, IEC 62619, UN38.3, RoHS

Where It Pays

High Demand Charges

Markets where demand charges exceed $15/kW/month. The higher the charge, the shorter the payback.

Capacity Charges

Sites billed on kVA rather than kW — power factor correction plus peak clipping compounds the saving.

Backup as a By-Product

The same cabinet that shaves peaks also carries essential loads through an outage. One asset, two revenue streams.

EV Charging Sites

A 60 kW charger on a 100 kW supply needs storage or a supply upgrade. Storage is usually cheaper than the upgrade.


The Certification Boundary

The 215 kWh cabinet is a behind-the-meter asset. It is CE marked (LVD, EMC, RoHS), IEC 62619 and UN38.3 compliant. It does not carry EN 50549 or the national grid-code certificates required for front-of-meter connection or grid export.

Behind-the-meter peak shaving, self-consumption and backup are all within scope. Export to the distribution network is not. If your project needs front-of-meter connection, tell us on the first call.


Send Us 12 Months of Interval Data

A CSV of 15-minute kW readings for the last 12 months is enough to model the saving precisely. We will return a shaving strategy and a payback curve.